Delta wolf steering?

[Wejon]

Brad,
I'm just beginning to build my 4th Meridian. Can you see any problem if I build it with the Delta Wolf, above seat steering arrangement, instead of the upside down goose neck thingy in the Meridian plans? I think this makes a lot more sense.

Also, I have been experimenting with a ventilated, spring mounted seat. As you know, your back gets really hot on a bent. Also, every bump, kicks you in the bottom, because you can't stand on the pedals. Will post a couple of pix, if I can make it work.

Thanks,

Don

[TheKid]

I don't understand. The Meridian steering is almost exactly like the DW OSS.
The pilot tube is a bit longer on the Meridian, but other than that it's the same. There's an upside down steerer/ head tube assembly on the WildKat for USS. Is this what you mean?

http://atomiczombie.com/product-meridian.htm

http://atomiczombie.com/product/deltawolf/deltawolf13-lg.jpg

http://atomiczombie.com/product-wildkat.htm

[Wejon]

Almost the same, except the gooseneck is inserted upside down in the pilot tube on the Meridian, and right side up on the DW

D

[TheKid]

Now I get it. I forgot about that in the plans, I built my Meridian 2 years ago. I didn't go that route. I made the pilot tube higher, then used the DW method and used a long stem. I made my DR the same way.