sberebit
07-18-2009, 03:53 PM
Is there a master list of parts written out somewhere before I start building?
Thank you,
Steve
trikeman
07-18-2009, 04:24 PM
Is there a master list of parts written out somewhere before I start building?
Thank you,
Steve
Since a lot of the parts come from salvaged bicycles, its hard to list exactly what you need. The Bicycle Builders Bonanza book does a great job of listing the steel ((cut list) you will need for the frame and showing you what other generic parts you will need, assuming you are talking about the first version (non-suspension) Marauder. I highly recommend the book.
In general, you will need:
About 8-10 feet of 1.5" 16 ga square steel tubing
A rear fork off a 26" mountain bike, and some chain stays (for the rear triangle)
Two head tubes off practically any bike of your choice (one for the steering mechanism)
a long rod (3'?) and two heim joints (ball joints) for the steeing mechanism
a set of handlebars
some plywood and padding for the seat
A 20" wheel and tire for the front and a 26" wheel and freewheel/cassette for the rear
A bottom bracket and crank off an old bike
paint
Shifters and brakes with levers and derailers
I guess that is about it, but there may be a few small things I left off since I am doing it from memory.
If you are builidng Version 2, you will need a rear triangle off a suspension mountain bike, instead of the front fork arms.