View Full Version : 20"-14mm wheels NEEDED
Stuart
08-21-2009, 09:19 PM
HI..
I'm looking for a pair of 20"-14mm Hub wheels.
If you have a pair at a reasonable price, please e-mail me at stuartm@ncable.net.au
I do live in Australia.
Stuart
PeterT
08-22-2009, 05:38 AM
GDAY fellow ocker!
Which part of Oz do you live in?
I happen to live in SA, and just near me is Rojon Cycles, an importer of most things bicycle. Are you looking for a prelaced and trued wheel or wanting the bits to do yourself?
PeterT
Stuart
08-23-2009, 12:42 AM
HI Peter
I live in Ballarat/Vic.
I looking to build a streetfox and having trouble getting the front wheels. As I'm a big block (170kgs) I need to build the heavy frame plus need the 14mm ales for the 2 frnt wheels. I would be happy with just plain old wheels with 14" hubs.
Stuart
PeterT
08-23-2009, 04:11 AM
Stuart,
Well, if you wanted to meet me near the half way point between Ballarat & Adelaide, I could deliver a pair of wheels to you :cheesy:
You havent said if you want them laced and trued or DIY, or you could email me your snail mail addy & I could organise to post them to you.
Rojon Cycles sell the rims, the axles, the tyres, the spokes, just tell me what you need/want and I'll get you a price eg 48hole, 14mm axle sealed bearings, stainless spokes, double wall /single wall rims, tyre size etc
my email addy is tremlett@emailaccount.com
PeterT
savarin
08-23-2009, 08:49 PM
http://www.bitexhubs.com/htm/hub-b-DH20M.htm
20mm axles.
Also have 15mm axles.
If only ordering a pair the postage will equal almost the cost of the hubs.
But they will post to Oz
PeterT
08-23-2009, 11:20 PM
Stuart,
If you dont want disc brakes on the wheels you can have the pair I made for the front of my Streetfighter for free. They cost $100 a pair from the importer, for everything but the tyres and tubes, and $100 each from my LBS.
I will be rebuilding my front wheels with disc brakes on them, so my current wheels need a new home
PeterT
Stuart
08-24-2009, 01:41 AM
Stuart,
If you dont want disc brakes on the wheels you can have the pair I made for the front of my Streetfighter for free. They cost $100 a pair from the importer, for everything but the tyres and tubes, and $100 each from my LBS.
I will be rebuilding my front wheels with disc brakes on them, so my current wheels need a new home
PeterT
Peter
E-Mail sent
Stuart