View Full Version : Starting a street fox

06-19-2013, 09:05 PM
Hello, I have my first build all dialed in and ready for tear down to paint and reassemble so... what now? Most would finish it, not me! I am starting a street fox with a few warrior features. I am going to do this one correctly, meaning I am going to post as often as I am able to make progress and ask questions before I build it 2 or 3 times on my own. This will hopefully make me more accountable and keep build time reasonable/

I have accumulated a donor bike, pair of Quando 36 hole hubs with disc mount and 20 mm axle hole. I have torn down a pair of single wall aluminum rims and started to prep head tubes and fork stems. Here is my question. Will the swing arm I have work? it is not a triangle set up as Brad uses in the plans. I have this style as well but it is only a 24 wheel. Thoughts on which to use? Here are photos.



06-19-2013, 09:40 PM
Will it work- probably- as to the 24 inch wheel it will just allow you to climb hills a little easier and go a little slower in compared to a 26" wheel. But not by much. Looks like your on a good start. Welcome to the fun.

06-19-2013, 09:57 PM
as long as the angles for the steering parts as per plans the swing arm will not matter

biggest drawback to 24inch wheels is limited tires and n tubes that are available

if seat angles are a problem can use a sling seat and build mounts to fit the frame