DIY Bike and Trike Plans



All Blog Entries

  1. Project 1 : Fox Steering - The hard bit ! - Part 2

    Hi Folks,

    After a bit of work with a half round file and flap disc I have both fish mouths cut. So time to mount the boom to the main frame.





    The first basic assembly in order to check the angles and alignment.



    Something is not right with the right-hand ...
    Categories
    Uncategorized
  2. Project 1 : Fox Steering - The hard bit ! - Part 1

    Hi Folks,

    Well I have been moving on …. but slowly. This is by far the hardest part so far to get right. The King Pin steering angles and mounting.

    I read some post in other forums and got some direction and good advice from other members (Thanks Emma). Then spent some time on the PC to try to come up with a plan.



    To get an angles correct when looking down the trike frame ...
    Categories
    Uncategorized
  3. Warrior derailleur

    I am near completion of my Warrior. There seems to be no mention of the rear derailleur bracket in the directions. The photos indicate such a bracket. Can anyone help me?
    Categories
    Uncategorized
  4. Project 1 : Fox Seat Post

    Hi Folks,

    Next up the Seat Post.



    Cut to size and preparing the End Cap.



    Am happy with this. Cleaned up, flush down to the seat post tube as this is not under load

    .

    Just testing the possible positions, allowing for the shock to compress and ...
    Tags: street fox Add / Edit Tags
    Categories
    Uncategorized
  5. Project 1 : Fox Main Frame Linkage

    Hello Folks,

    So I am now attempting the Main Frame Linkage for the Street Fox. The bit that links to the rear triangle.



    I have my stripped and cleaned link tube from the donor bike.



    I setup the pillar drill with a hole saw and spent ages cutting through the main frame tube to form the fish mouth. Basically I cut almost ...
    Tags: street fox Add / Edit Tags
    Categories
    Uncategorized