DIY Bike and Trike Plans



  • Tay's chopper trike - England

    http://2.bp.blogspot.com/-BQrdL2-8Ax...ay%2Btrike.jpg
    Submitted by AtomicZombie forum member and bike builder, Naughtyboy.

    "We built this because my youngest two kids needed bigger bikes and they both love workshop time with daddy.

    One of the kids from school turned up on a shop built chopper, so Tay looked it over and said, "Me and my dad can build (one) better."

    We've built all sorts from scrap wood and metal and they have even helped me with rebuilding an old Land rover.

    Tay decided he wanted a trike after seeing my Gladiator (chopper trike) plans, and he also looked through my 15 other plans to plan future bikes. The front is based on the Gladiator chopper trike and the rear, I think, was based on the DeltaRunner Recumbent Trike, but flipped over.

    The forks are made from 16mm od x 8mm id blow pin shafts left over from machine re-furb at work. Suspension is made of old trampoline springs I found. The handlebars are from an old rotavator which I'm planning on using engine on quad-cycle (so many ideas, so little time).

    I had to turn some sleeves to fit them as id was bigger than od of forks. Tay helped with drilling on lathe. Front wheel is 20" and the back started as the same size, but are now 26" as we needed the smaller one for his little sister's trike.

    I just wish he would let me finish painting it, but he's too busy racing on the road with his mates! I am impressed with how tight a turning circle it as and how fast he can go."

    From the builders forum: http://forum.atomiczombie.com/showth...9247-happy-boy
    Gallery: http://forum.atomiczombie.com/galler...imageuser=5871
  • Recent Forum Posts

    hape03

    Re: Delta fox electrified

    Well, it's not in my interest to raise a bad mood her about not publishing pictures on every single move, but it sure makes me curious. My electrification

    hape03 Today, 04:28 PM Go to last post
    hape03

    Re: Started my build, a few pics

    ...for sure, but as with everything that looks straight forward it takes some struggling before they all work together. As I recall it it took me a few

    hape03 Today, 04:18 PM Go to last post
    bambuko

    Re: Started my build, a few pics

    and just to test it,


    and you have all the codes provided by your pic host:



    so it should be easier than

    bambuko Today, 11:12 AM Go to last post
    bambuko

    Re: Started my build, a few pics

    yes, a lot of people seem to have a problem with this and that's why the instructions are right in front of you

    bambuko Today, 11:06 AM Go to last post
  • AZTV videos

    bike building tutorials

    More AZTV videos here.