DIY Bike and Trike Plans



  • Gravity Bike racer - England, UK

    http://4.bp.blogspot.com/-0FcE4Hoos1...ebee_gb_ii.jpg
    John "Doc" Warner shares some photos of his modified bicycle for Gravity Bike competitions. Named "Hee-Bee GB II", Doc built the gravity bike for a competition this past May.

    What is a gravity bike?

    A modified bicycle with a frame that's low to the ground to reduce wind resistance and the center of gravity. It has narrow handlebars, no pedals or chains, front and back disc brakes, knee rests and long foot pegs so the rider stretches out horizontally.

    The goal is to descend steep downhill courses to reach insane speeds, often exceeding 90mph. This extreme sport has been gaining popularity worldwide for more than three decades and Gravity Bike races are held around the world.

    Competitors wear helmets (some races require full-face), leathers, speed suits, gloves, footwear, and elbow and knee pads. According to Doc, "It's a great sport, very cheap (to build and compete), fantastic fun, and very accessible to all abilities and ages. Perfect for DIY/home-builders. You can build a competitive bike for around £60/$100 (but) you can, of course, spend less, or much more.

    "This is my first Gravity Bike build. I made it earlier this year to enter the 2014 Penn House Gravity GP and finished second overall (Streamlined Buggy beat me by just over a second)."

    See more pictures of Doc's Gravity Bike in the builders gallery.
  • Recent Forum Posts

    Twinkle

    Re: 20" wheeled e-trikes------ the continuing story----

    The voices are still good but their health is failing - there will always be another time ( I hope ) The car took up a bit of time and I pulled a neck

    Twinkle Yesterday, 03:28 PM Go to last post
    Twinkle

    Re: Project X , emma's folding e-trike

    Hi Folks


    With an abundance of time and enthusiasm delivered yesterday the longer cabled pedelec sensor was fitted , The cables were

    Twinkle Yesterday, 03:12 PM Go to last post
    MrIdaho

    Re: Schwinn StingRay

    I cobbled a disc brake adapter using two steel washers. One was cut in half to mount on inside around the hub. Drill n tap (5mm) add long socket head

    MrIdaho Yesterday, 03:09 PM Go to last post
    shootrrdave

    Re: Looking for builder (can't do it myself)

    Whoops, sorry. I think I have fixed it now.

    shootrrdave Yesterday, 12:17 PM Go to last post
  • AZTV videos

    bike building tutorials

    More AZTV videos here.