Making the 'coolest' part

25 gauge beam from my old metal shed


Marked ready for bending into shape


There's a 3/8 bolt under that metal plate,
which I used for making the radius of the bend.




First trial fit. Didn't sit the same as the mock up,
(to high)so some adjusting to be done.




Moved the mounting tabs, from the top of the frame to the inside.



Added a bottom and secured with screws.
After a few trials and errors, this is the semifinal version.
Next is to jig square it, trim the overlapping joints, cut some backing pieces,
and tack weld everything together.

Then find an appropriate mesh screen for the front, and back