I've found my way,
I'll be going back to plan A


The 'pivot' is out



Cut off the old pivot.



The springs are back in.



Thought up a new spring perch bracket for the springs.




I'm using 3/16 " plate for this bracket, so a partial grind through to help with bending.



The first of two bends. The second bend (orange line.next pic) will have to wait until there's no wind.
I have to weld the first 'notch' back together, because it wants to bend while trying to
... bend the second bend...Got It?



I will be using the springs from my two donor MTB shocks.