Recent content by excubitor

  1. excubitor

    Comment by 'excubitor' in media 'Saddle-spring.JPG'

    It took the standard part of the spring or one of those two pieced bikes I had laying around. It came out of necessity because otherwise the bike would have been hard framed. Instead of the wheels, I dampened the saddle...
  2. SIDE-CARGO

    SIDE-CARGO

    I had an old bike and an old cart.... Easy practical project.
  3. SIDECARGO1.JPG

    SIDECARGO1.JPG

    the MTBike on a stand and the cart besides it. Notice how the cart had a central wheel, while the alignment of the wheel needed to be in line with the back wheel of the bike... I of course discovered it during the building process...
  4. SIDECARGO2.JPG

    SIDECARGO2.JPG

    quick tack weld to keep everything in position.
  5. SIDECARGO3.JPG

    SIDECARGO3.JPG

    back wheel repositioning, aligned with the backwheel of the bike.
  6. SIDECARGO4.JPG

    SIDECARGO4.JPG

    fast method: cut a square pipe piece and weld it on the cart.
  7. SIDECARGO5.JPG

    SIDECARGO5.JPG

    the wheel bolt is still accessible, in order to be able to dismount and change the tire.
  8. SIDECARGO6.JPG

    SIDECARGO6.JPG

    a reinforcement for the sidecar wheel was needed.
  9. SIDECARGO7.JPG

    SIDECARGO7.JPG

    Voilà! A freshly painted bike always looks better! Notice: from the steering column not one but two curved pipes are welded to the cart frame. Same goes for the back: the bike frame is welded with 2 curved pipes to the cart frame.
  10. SIDECARGO8.JPG

    SIDECARGO8.JPG

    Load test: I could load a person of about 85kg with no problems. Particularly if the weight sits mainly on the line of the two back wheels!
  11. SIDECARGO9.JPG

    SIDECARGO9.JPG

    After installing the painted wooden panels... ready to load materials in the plant nursery!
  12. Dark Emerald & Honey Leather Chopper

    Dark Emerald & Honey Leather Chopper

    A chopper I built off a simple MTB. Lots of custom made parts, with the standard ones left in place where they made sense. In particular the fork was (back then) a tricky part to build from scratch. Swiss Army leather bags and a matching saddle complete this 3.2m chopper.
  13. Early-mockup.JPG

    Early-mockup.JPG

    The saddle solution was later changed.
  14. Saddle-spring.JPG

    Saddle-spring.JPG

    The saddle is dampened by a standard system, but with a Piaggio Ciao saddle's spring.
  15. front_early.JPG

    front_early.JPG

    First ideas on how to fix the steering to the fork. The upper frame tube was lodged on a piece of the existing to keep the alignment.
Top