- Joined
- Apr 10, 2021
- Messages
- 42
Ok, so I was asked to make a post about the rear axle setup on my Rhoades quadrcycle as it drives both rear wheels. This bike uses pass thru hubs on all four wheels with bolt on adapters for the rear wheels to bolt on the drums for the band brakes and tabs to slide over a freewheel single speed on each side to power both wheels and let them freewheel for turns or to coast. It does have two 5 speed freewheel cartridges due to having two cranks, one for each person (two seater), but has a solid axle all the way across. I will try to post pictures, if anybody needs anything explained, I'll do my best, and if anyone wants a more detail picture of any of it, I'll try to get as soon as possible.
And on with the picture show.........
And on with the picture show.........
Last edited: